University of Taipei:Item 987654321/5155
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 1914/17082 (11%)
Visitors : 3873400      Online Users : 715
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://utaipeir.lib.utaipei.edu.tw/dspace/handle/987654321/5155


    Title: 光導開關應用於電路信號的取樣與固定
    Signal Sample-and-Hold Using Photoconductive Switches
    Authors: 吳朝甲
    Date: 1990-06
    Issue Date: 2011-12-07 11:52:31 (UTC+8)
    Publisher: 臺北市立師範學院
    Abstract: 中文摘要
      被研究的光導開關是製作在銦磷化合物(I<sub>n</sub>P)的光導材料上,以面積大小為50×50平方微米的方形面鍍上互相交叉的手指形電極而成。此種開關在無光線照射時的電阻大於10<sup>7</sup>歐姆,電容則甚小,約為3×10<sup>-14</sup>法拉。如用頻率為10<sup>8</sup>週,峯值光功率18毫瓦,工作時距約為2×10<sup>-10</sup>秒的脈衝雷射光照射,這個開關的平均通路電阻為3×10<sup>3</sup> 歐姆,持續了2×10<sup>-9</sup>秒的時距,另有8×10<sup>-9</sup>。秒為斷路時距,在斷路的時間,因為尚有微量的二極體雷射自發光照射在開關上,所以斷路電阻不是大於10<sup>7</sup>「歐姆,而是大約為10<sup>5</sup>歐姆。信號取樣與固定的執行情況是輸入信號電壓頻率為10<sup>7</sup>週,振幅是1.0伏特,取樣次數每秒10<sup>8</sup>次,光導開關用200微微秒脈衝雷射光照射,取樣的類比信號經由場效電晶體射極偶合輸出。在時距為2×10<sup>-9</sup>秒的電通路內,輸出信號的最大振幅為78毫伏特,因為這時開關電阻大約3.1×10<sup>3</sup>歐姆,而在電斷路的8×10<sup>-9</sup>秒內,可得19毫伏特的最大漏電輸出電壓,這是由於此時尚有10<sup>5</sup>歐姆的開關電阻的緣故。

    Abstract
      The photoconductive switch investigated has a dimension of 50μm×50μm and an interdigital finger with 4μm metal and 4μm InP semiconductor. It is characterized by a dark resistance>>10 MΩ and a switch capacitance of 30 fF Under 200-ps optical pulses of 18 mW peak power and 100 MHz repetition frequency, the switch has an average on-resistance of 3 KΩ over 2 ns and off- resistance of 100 KΩ over 8 ns due to laser spontaneous emission. Sample-and-hold of 1 volt amplitude and 10 MHz sinusoidal signal at l00 Msamples/sec is performed by activating the switch with 200-ps optical pulses and by holding the sampled signal over the 2 pF gate capacitance of the FET source follower. The maximum sampled amplitude of 78 mV is due to 3.1 KΩ on-resistance over 2 ns aperture time and the observed feedthrough of 19mV is due to 100 KΩ off-resistance over 8 ns holding time interval.
    Relation: 臺北市立師範學院學報
    21期
    257-264
    Appears in Collections:[Office of Academic Affairs] 臺北市立師範學院學報 (19-36卷1期)

    Files in This Item:

    There are no files associated with this item.



    All items in uTaipei are protected by copyright, with all rights reserved.


    如有問題歡迎與系統管理員聯繫
    02-23113040轉2132
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback